Cảm biến đo nồng oxy EnviteC oxygen sensor OOM102-1 OOM104 OOM105 OOM103-1 OOM202-1 OOM111 OOM103 OOM102

Measuring range: 0-100%

Output signal in air: 9-14mV

Circuit interface: 3Pin Molex connector

Accuracy and repeatability: <1% volume oxygen, after calibration in 100% oxygen

Linearity error: <3% relative error

Response time: <12 seconds relative to 90% relative

Zero drift: <200uV in 100% nitrogen for 5 minutes

Cross Interference: <0.5% volume oxygen for:

                          10% CO2, in equilibrium nitrogen

                          80%N2O, in balance nitrogen

                           7.5% Halothane in equilibrated nitrogen

                          7.5% isoflurane in equilibrated nitrogen

                          7.5% enflurane in equilibrium nitrogen

                          9% enflurane in equilibrated nitrogen

                          20% desflurane in equilibrated nitrogen

Effect of temperature: -0.03% relative temperature, 25°C

Effect of Pressure: Proportional to partial pressure of oxygen

Effect of mechanical shock: <1% relative error, after falling from a height of 1 meter

Working temperature: 0℃－50℃

Temperature Compensation: Built-in thermistor compensation

Temperature influence: 25℃－40℃, 3% relative error

Compensation (steady state): Between 0°C and 50°C, 8% relative error

Working humidity: 0-99%RH (can be condensed in air for several hours)

Storage temperature: -20°C -50°C

Recommended storage temperature: 5℃－15℃

Recommended load: ≥10Ω

Warm-up time: <30 minutes after sensor replacement

Rated sensor life: ≥1 000 000% volume oxygen hours

Weight: about 28G