Đồng hồ đo hiển thị số Changhui SWP-ST801-00-23-N SWP-ST803-01-23-HL SWP-ST803-01-23-HL-P SWP-ST804-01-23-HHLL SWP-ST804-01-23-HHLL-P SWP-ST801-02-23-N SWP-ST803-02-23-HL SWP-ST803-02-23-HL-P SWP-ST804-02-23-HHLL SWP-ST804-02-23-HHLL-P SWP-T801-00-23-N-X

Đăng ngày 14-06-2022 03:44:39 PM - 231 Lượt xem

Mã sản phẩm: S004079

SWP-ST801-00-23-N
SWP-ST803-01-23-HL
SWP-ST803-01-23-HL-P
SWP-ST804-01-23-HHLL
SWP-ST804-01-23-HHLL-P
SWP-ST801-02-23-N
SWP-ST803-02-23-HL
SWP-ST803-02-23-HL-P
SWP-ST804-02-23-HHLL
SWP-ST804-02-23-HHLL-P
SWP-T801-00-23-N-X
SWP-T803-01-23-HL-X
SWP-T803-01-23-HL-P-X
SWP-T804-01-23-HHLL-X
SWP-T804-01-23-HHLL-P-X

Tình trạng sản phẩm:

Brand: Changhui
Model: T80
Color classification: SWP-ST801-00-23-N SWP-ST803-01-23-HL SWP-ST803-01-23-HL-P SWP-ST804-01-23-HHLL SWP-ST804-01-23-HHLL -P SWP-ST801-02-23-N SWP-ST803-02-23-HL SWP-ST803-02-23-HL-P SWP-ST804-02-23-HHLL SWP-ST804-02-23-HHLL- P SWP-T801-00-23-NX SWP-T803-01-23-HL-X SWP-T803-01-23-HL-PX SWP-T804-01-23-HHLL-X SWP-T804-01-23 -HHLL-PX add 232 or 485 communication output for other models, please consult
Working principle: Electronic thermostat
Power: 250V10A
Thermostat temperature range: -1999-9999
Item number: T80

SWP-LED series single-loop digital/light bar display controller adopts microprocessor for control operation, which can perform high-precision linear correction measurement on various nonlinear input signals. The instrument integrates digital and analog instruments, and can perform digital display control (high-brightness LED digital display) and relative analog display (light column display) for measurement signals such as temperature, pressure, liquid level, speed, etc. The display is more clear and intuitive, and the double-beam display mode can be selected.

Specifications		Description
use surroundings	ambient temperature	0 ~ 50℃
	Relative humidity	≤85RH Avoid strong corrosive gas
	Supply voltage	Conventional AC220V+10-15% (50Hz±2Hz) Special type AC85 ~ 260V——Switching power supply DC24V ±2V——Switching power supply
	Power consumption	≤6W
enter Signal	analog	Thermocouples: Standard Thermocouples - B, S, K, E, J, T, WRe3-25, etc.
		Resistance: standard thermal resistance - remote pressure resistance such as Pt10, Pt100.1, Cu50, Cu100, etc.
		Current: 0 ~ 10mA, 4 ~ 20mA, 0 ~ 20mA, etc. - input impedance ≤ 250Ω
		Voltage: 0 ~ 5V, 1 ~ 5V, mV, etc. - input impedance ≥ 250KΩ
	Switch	Pulse Signal: Waveform - Rectangular, Sine or Triangular Amplitude - greater than 4V (or according to user requirements) Range - 0 ~ 10KHz (or according to user requirements)
		Contact signal: electrical contact input signal
output Signal	Analog output	DC 0 ~ 10mA (load resistance≤750Ω) DC 4 ~ 20mA (load resistance≤500Ω) DC 0 ~ 5V (load resistance ≥ 250KΩ) DC 1 ~ 5V (load resistance ≥ 250KΩ)
	Switch output	Relay control output - relay ON/OFF with hysteresis. AC 220V/3A DC 24V/5A (resistive load) Thyristor control output -SCR (thyristor zero-crossing trigger pulse) output, 0.5A/400V Solid State Relay Output - SSR (Solid State Relay Control Signal) output, 6 ~ 24V/30mA (voltage is not adjustable) Triac output - SOT thyristor output, 5A/400V
	Communication output	Interface mode - standard serial two-way communication interface RS-485, RS-232 C, RS-422, etc. Baud rate - 300 ~9600 bps freely set inside the instrument
	Feed output	DC 24V load≤30mA
measurement accuracy		±0.2%FS±1 word or ±0.5%FS±1 word
Resolution		±1 word
Measuring range		-1999 ~ 9999 words
Display method		-1999 ~ 9999 words of measured value display -1999 ~ 9999 words of set value display LED working status display
Way		The control/alarm mode is with hysteresis upper limit or lower limit alarm (user can freely set)
control precision		±1 word
Temperature compensation		0 ~ 50℃ digital automatic temperature compensation
print control		You can choose to directly connect to various serial printers (such as LQ-300K, TpuP series micro-printing, etc.), and the printing interface is RS-232C
Printing accuracy		The same accuracy as the instrument
Parameter setting		Panel touch key setting, parameter setting value is permanently saved after power off, parameter setting value password lock
Protection method		Input loop disconnection alarm (when thermocouple or resistance input), relay output status LED indication, input over/under range alarm, Automatic reset of power supply under voltage, automatic reset of abnormal work (Watch Dog)

★ SWP-LED series light column measurement display controller type spectrum table

Model	code										Description
SWP-	ST□	□□	-□	□	-□□	-□	□	-□	-□	-□	Light bar display measuring instrument
Dimensions	8										160×80mm (horizontal) , 80×160mm (vertical)
control	01 03 04										Measurement display three-position control Four-limit control or four-limit alarm output ^*2
communication method	□										see " Communication methods "
output method	□										See " Transmitter Output Mode "
input type	□□										See " Input Types "
first alarm method	N H L										No alarm (can be omitted) Upper limit control / alarm (four limit control / alarm 2H ) ^2 Lower limit control / alarm (four limit control / alarm 2L ) ^2
Second alarm method	N H L										No alarm (can be omitted) Upper limit control / alarm (four limit control / alarm 2H ) ^2 Lower limit control / alarm (four limit control / alarm 2L ) ^2
Feed output	P										DC24V feed output
Power supply	W T										DC24V power supply AC85-260V power supply (switching power supply) AC220V power supply (linear power supply , can be omitted)
Power supply	X										Horizontal display Vertical display (can be omitted)

★ Note 1 : C80 , C90 series are 0.8 -inch LED display, S80 , C70 , C40 series are 0.56 -inch LED display , C10 series are 0.32 -inch LED display.
★ Note 2 : Four-limit control or four-limit alarm output is four relay control outputs , the user can modify the internal parameters to set the desired control or alarm mode . ( Four-limit control / alarm is only for T.C80 , S80 and C90 series provided, 2H for two upper limit control / alarm, 2L for two limit control / alarm ) .
★ Note 3 : Light bar display controller SWP-ST803-01-23-HL-X (horizontal table " S " can be omitted) .

★Communication method:

code	0	2	3	4	8	9
communication method	no communication	RS-232	print port	RS-422	RS-485	special specification

★Communication protocol: SWP communication protocol is adopted when leaving the factory.
If the user has ordered a special communication protocol, please specify it when ordering.
When selecting a meter with a print port, some of the meters cannot meet the printing function. When ordering, choose a meter that can meet their requirements in function.
★Control output mode:

Selection code	0	1	2	3	4	5	6	7	8	9
output method	no output	relay	4~20mA	0~10mA	1~5V	0~5V	SCR output	SSR output	special specification	SOT output

SCR-thyristor zero-crossing trigger pulse output SSR-solid state relay control output SOT-bidirectional thyristor output
★Transmission output method:

Selection code	0	2	3	4	5	8
output method	no output	4~20mA	0~10mA	1~5V	0~5V	special specification

★ Input Type:

code	input type	Measuring range	code	input type	Measuring range	code	input type	Measuring range
01	B	400~1800℃	09	Pt100.1	-199.9~320.0℃	17	30~350Ω	-1999~99999d
02	S	0~1600℃	10	Cu50	-50.0~150.0℃	18	special specification	User pending
03	K	0~1300℃	11	Cu100	-50.0~150.0℃	19	4~20mA square root	-1999~99999d
04	E	0~1000℃	12	4~20mA	-1999~99999d	20	0~10mA square root	-1999~99999d
05	T	-199.9~320.0℃	13	0~10mA	-1999~99999d	twenty one	1~5V square root	-1999~99999d
06	J	0~1200℃	14	1~5V	-1999~99999d	twenty two	0~5V square root	-1999~99999d
07	WRe3~25	0~2300℃	15	0~5V	-1999~99999d	twenty three	Fully switchable input
08	Pt100	-200~650℃	16	0~20mA	-1999~99999d