Bộ cách ly tin hiệu Weidmüller ACT20P-CI-CO-P 2489680000

Order number: 2489680000 Model:  ACT20P-CI-CO-P

Input signal: 0(4)...20mA Output signal: 0(4)...20mA

• 24Vdc power supply

• Isolation voltage 2kVac
• Can supply power to field transmitters
• Three-terminal isolation of input, output and power supply
• Product width 12.5mm
 
 
Screw connection
 
ACT20P-CI-CO-P          
 
         
Icon Icon Icon Icon Icon
 
Order data
Type  ACT20P-CI-CO-P
Order number  2489680000
Version  signal transmitter/isolator, input: 0(4)-20 mA, output: 0(4)-20 mA
GTIN (EAN)  4050118535150
Quantity  1 pc(s).
Available  inventory
Dimensions and weight
Width  12.5 mm
Width (inch)  0.492 inch
Height  127.1 mm
Height (inch)  5.004 inch
113.7 mm deep
Depth (inch)  4.476 inch
Weight  110 g
Net weight  120 g
temperature
Minimum storage temperature.  -40 °C
Minimum operating temperature  -20 °C
Maximum storage temperature  85 °C
Maximum operating temperature  60 °C
Humidity  5...95 %, non-condensing
Operating temperature  -20 °C...60 °C
Storage temperature  -40 °C...85 °C
Product environmental compliance
REACH SVHC  Lead 7439-92-1
enter
Input number  1
Sensor power supply  > 17 V DC when 20 mA, max 30 V @ open circuit, max 50 mA @ short-circuit
Input signal  2-/3-wire transmitter, two-way HART® signal
Input current  0...20 mA, 4...20mA
Voltage drop  ≤ 1V
Output
Number of output channels  1
Output current  0...20 mA, 4...20 mA, HART® digital signal
Current load resistance  ≤ 550Ω
in summary
Power supply voltage  20…30 V DC
Rail  TS 35
Temperature coefficient  80 ppm/K
Current consumption  ≤60 mA (24V power supply, 20mA output)
Accuracy  <0.1% of final value
Insulated  three-way splitter, between input/output/power
Configuration  None
Step response time  ≤ 0,5 ms
Insulation parameters
EMC standards  EN 61010-1:2011, UL 61010-1, EN 61326-1
Shock resistance  4 kV (1.2 / 50 µs)
Pollution degree  2
Insulated  three-way splitter, between input/output/power
Insulation voltage  2 kV input/output/power supply
Overvoltage category  III
Connection parameters
Connection type  PUSH IN
Minimum wire crimping area AWG  AWG 26
Maximum wire crimping area AWG  AWG 14
The minimum crimping area of ​​a single wire is  0.2 mm²
Maximum cross-section of single-stranded conductor  2.5 mm²
Minimum crimping area for flexible wires  0.2 mm²
Maximum crimping area for flexible wires  2.5 mm²
Wire connection cross-section, multiple thin wires, with tubular end DIN 46228/4, minimum  0.2 mm²
Wire connection cross-section, multiple thin wires, with tubular end DIN 46228/4, max.  2.5 mm²
product information
Product information The  non-adjustable DC isolation amplifier ACT20P-CI-CO can isolate standard analog current signals from the power supply or 2 or 3 sensors. The analog input current signal is converted into an analog output current signal in a linear manner and electrically isolated. The power supply is electrically isolated from the input and output (3-terminal isolation). 
 
Attributes 
• HART-compatible range is 0.5-2.5 kHz 
• The active or passive mA signal input is fully electrically isolated. 
• Front panel LED has running status display 
• 3-terminal electrical isolation between input, output and power supply.
download
Certification/Certificate/Declaration of Conformity
Declaration of Conformity
Engineering data
STEP
User documentation
Instruction sheet
classification
ETIM 6.0  EC002653
ETIM 7.0  EC002653
eClass 9.0  27-21-01-20
eClass 9.1  27-21-01-90
eClass 10.0  27-21-01-20
Certification
Certification  CE EAC
Certification  CULUS;
ROHS  consistent